Featuring better bonding, improved cold temperature toughness, and a 20% reduction in the carbon footprint of the resin for every ski produced.

We've extended the amount of sidewall that stretches into the core of the ski while adding more material over the steel edges to increase the total bonding surface area. This creates sidewalls more resilient to hard edge impacts, like sliding rails.

We've extended the ski core to run through the tips and tails while creating a glass-on-glass bonding area in both the tip and the tail. This gives even compaction over the tip / tail of the ski and encapsulates anything that could delaminate in a large glass-on-glass bonding region, meaning that while delaminations can always happen, this will keep the delamination from propagating to the core of the ski and limit it to edge chipping.

FIVE different radiuses are blended into the ski’s sidecut. The result? A wide variety of turn shapes and an intuitive feel.

The same flex pattern in front and behind your boot conforms to terrain equally riding forward & backwards.

30% thicker base & edge, 2mm wide x 2.5mm high steel edges and 1.7mm thick base dramatically increase durability and tuning life the skis.

A dense, high‑performance base that absorbs wax efficiently for superior glide. Known for speed and durability across snow types.

The tip and tail lift away from the snow to bring the contact points closer to the center of the ski. This increases a ski's lift in deep snow and allows it to engage more quickly on hardpack when rolled over on edge.